Skip to main content

Day 2

Today when we showed up we started out by putting up strapping on the other half. After that, we cleaned up the job site and broke for lunch. For the afternoon session, we began staining wood. This wood will be used as trim once the sheetrock for the ceiling is up. The lights for the second half of the project also were being put in by the electrician. Tomorrow seems to be a day for insulation. The insulation will be the biggest part of the project and take many days. 
Hours: 4:40
The project as it now stands. 

The stained wood. 

Kevin Nailing. 

Comments

  1. Kelly Griffin-BrownMay 2, 2017 at 8:11 PM

    I didn't realize insulation was that intensive. Keep up the good work!!

    ReplyDelete
  2. Kelly Griffin-BrownMay 2, 2017 at 8:11 PM

    I didn't realize insulation was that intensive. Keep up the good work!!

    ReplyDelete

Post a Comment

Popular posts from this blog

Day 9

Today we started out by sheetrocking and got one more piece in. Then while Adam was cutting the next piece Kevin and I began scraping the mud off the first row. We finished that as the electrition showed up to cut out the first two lights in the first row. While he was doing that we began to apply the second coat of mud to the first row. After that, we broke for lunch. I was unable to make it back due to a race but Kevin and Adam got the rest of the sheets up this afternoon. Tomorrow we will begin mudding. Hours: 3:10 Total: 38:30 The mud all smoothed out! First two lights cut out!
1 comment
Read more

Day 20

Today we showed up at the ski area to find the boards applied urethane on the day prior to be dry. This means that we were able to get an another coat on them and put up three more strips in the morning. We then went to lunch and when we got back we put up the remaining strips. This signifies our last day down at the ski area. I will miss doing this every day. Hours: 6:00 Total: 73:30 Midway! All Done!
Post a Comment
Read more